Position Transducer Usage Survey
Complete the Survey for a FREE Engineering Guide and Stainless Steel Ruler!
13-page "String Potentiometer and String Encoder Engineering Guide" and
precision-etched 6-inch (150-mm) stainless steel ruler with depth marker and fraction-to-mm conversion table
You will receive the summary results of this survey if you provide your e-mail address below (
Supply of stainless steel rulers is limited.
Survey must be completed in full.
This offer expires 1 December 2003.
Tip: Use the Tab key to move field to field.
1. What types of position transducers do you use (select as many as apply)?
Cable (draw wire, wire rope, string pot)
2. What linear displacement ranges do you measure (select as many as apply)?
0 to 2 inches
0 to 4 inches
0 to 10 inches
0 to 25 inches
0 to 50 inches
0 to 100 inches
0 to 200 inches
0 to 400 inches
3. What is your preferred electrical output for position transducers (select as many as apply)?
0 to 5 VDC
0 to 10 VDC
Bridge (Strain Gage Compatible)
Quadrature (Encoder (Digital))
4. Are the position transducers you use generally more or less reliable than the other components of your entire control or data acquisition system (for example, other sensors, actuators, software, hardware)?
About the Same
5. Rate the following characteristics as to how they relate to your experience with position transducers:
5.5 Ease of Mounting
5.6 Electrical Outputs/Connections
5.7 Environmental Protection
5.9 Product Value
6. What is your single most common position transducer failure source?
7. What position transducer brands do you use?
8. What is your typical operating environment?
E-Mail Address (optional)
Subscribe me to the
Position Measurement & Control
Position Transducer Solution Guide
May we contact you to discuss your position transducer failures?
Have you previously heard of SpaceAge Control?
Position Measurement Newsletter